WE ACCEPT VISA, MASTERCARD, DISCOVER AND AMERICAN EXPRESS

Specifications:

• 14 CFM @ 90 PSI
• 145 PSI Max Pressure
• 19.5 AMPS @ 220V
• 1750 TEFC Motor
• 30 AMP Breaker Needed
• 400 Pound Shipping Weight
• 69 1/4"H  x  34" W  x  24"D

This is an Eaton Compressor factory-direct, custom-built air compressor. We have 31 Years experience in building QUALITY air compressors. We have parts, sales, and service for this unit. The advantage of buying from our company is that we know air compressors and if you would ever have a problem with your compressor, we cannot only get you the parts for this unit, but we can give you technical information if you need it repaired. Most other companies do not know compressors and when you need parts and service, you are stuck! This has a 5-year FULL BUMPER TO BUMPER warranty on the compressor pump from Eaton Compressor and this warranty is NOT a limited warranty or pro-rated warranty.  This unit is "loaded" with many features. Don't be tricked by companies offering "free freight". They are really stripping a lot of features off of the unit and in real terms, you ARE paying for the freight and getting less for your money. We will list below all the options and dollar amounts that are INCLUDED on this unit. Print this add off, take it to a compressor company, and start looking at all the options and you will see you are getting CHEATED! Hey guys…it’s finally here. This is our NEW, 3 Cylinder Unit with Solid Cast Iron Cylinders, Crankcase, Crankshaft, Valve Plates, and Flywheel.  This unit has 14cfm @ 90 psi with a max pressure of 135 psi. This is a FACTORY-DIRECT ALL Cast-iron construction, single stage air compressor. This unit includes:

• RAISED MOUNTING PLATFORM
  
  - this allows air flow from the flywheel to flow under crankcase for maximum oil cooling ($35.00 value)
• 1/4" BALL VALVE TANK DRAIN with a 6" DRAIN PIPE and a 1/4" STREET L plumbed out the front of the unit for easy access -NOT petcock drain ($20.00 value)
  
  
• 1/2" BALL VALVE AIR OUTLET -for turning your tank air on and off ($12.00 value)

   

   

   

• 1/4” BALL VALVE CRANKCASE OIL DRAIN - this is very nice when you are draining your crankcase- you can turn it off and on very easily without making a mess when changing the oil($14.00 value)

  
  
  3 each 1/2" LARGE AIR FILTERS-these are much better because they are large filters and they will not have to be changed as much as smaller filters and they are not plastic, they are ALL metal ($45.00 value) - cast-iron pump-not sleeve cylinders-solid cast iron
  
  - large oil reservoir and an oil sight glass- 3 large automotive-type air filters- true 3 HP motor-19.5 amps, 220 Volt, Single Phase

  TOTAL of $126.00 in options included on this unit.

   

   

  -60-gallon ASME Code approved air receiver (beware in buying units without this code-they can be cheaper built tanks and possible tank explosion can occur)
  
  -2 V A-Belt drive—NOT 1 belt drive
  
  - all steel 13-gauge, HEAVY, HEAVY duty belt guard-built very durable (NOT plastic or wire birdcage-type guard)

  - quality pressure switch, pop-off safety valves, and ball valves

  - a ball valve drain plumped out the front of air receiver for easy draining condensation from air receiver-NOT cheap petcock-type drain

  - 1/2" ball valve air outlet

  Unit weighs approximately 400 lbs. with shipping crate. There are companies claiming all cast iron, but in reality they have a sleeve surrounded by aluminum. The way to tell if they are cast iron is to take a magnet with you when shopping. If the magnet does not stick to the compressor--IT IS NOT cast iron...it's aluminum. This pump does not have reed valves as a valve system. It is a free floating valve system which will last much longer than reed valves. This unit comes complete with Owner's/Operator's manual and Parts manual. Please email us with city, state, and zip for a freight quote. We give some of the most competitive shipping rates---but we do not "bump up" the unit cost and then claim "free shipping"!  Residential delivery is an additional $15.00 and liftgate service is an additional $15.00.  You can also pick the unit up here at our factory to save on freight-(Ohio Sales Tax of 7.5% would then apply unless you have a tax id number). We accept VISA & MASTERCARD, money orders, cashier's checks, certified checks, or business and personal checks. However, if sending business or personal check, unit will ship 10 days after receipt of check. If you have any questions, feel free to email us or call Matt Cain, Owner-Eaton Compressor at 937-456-1752. We have 24 hour-7 days/week technical information, parts, and service.