This is an Eaton Compressor FACTORY-DIRECT, CUSTOM-BUILT & FABRICATED AIR COMPRESSOR. We have 30 Years experience in building QUALITY air compressors. This Unit has a 5-year Parts warranty Except on the Honda Motor. The Motor carriers a 3 year warranty from Honda Only. This warranty is NOT a limited warranty or pro-rated warranty. There are companies offering from a 1 year to a 5 year warranty. Make sure when you buy that you are buying a FULL warranty, not a pro-rate warranty. Just remember, a pro-rated warranty means the older it gets in the warranty period, the more risk the customer has. The percentage is higher that you pay out of your pocket. The advantage of buying from our company is that we know air compressors Most other companies do not know compressors and when you need parts and service, you are stuck! This unit is "loaded" with many features and weighs 460 lbs. Don't be tricked by companies offering "free freight". They are really stripping a lot of features off of the unit and in real terms, you ARE paying for the freight and getting less for your money. We will list below all the options and dollar amounts that are INCLUDED on this unit. Print this add off, take it to a compressor company, and start looking at all the options and you will see you are getting CHEATED! This is a 13 HP Electric-Start Gas Air Compressor with 5-year pump warranty and a 3-year warranty on the Honda engine. This unit includes:
· RAISED MOUNTING PLATFORM under compressor pump-this ensures maximum crankcase oil cooling and longer pump life ($40.00 value)
· RIGID MOUNTING PLATFORM under motor - this ensures much less vibration on your tank and VERY smooth unit operation($85.00 value)
· 3/4" AIR BALL VALVE OUTLET ($15.00 value)
· 1/4" BALL VALVE DRAIN plumbed out front of air tank for easy access ($20.00 value)
· This pump includes solid steel connecting rods with insert bearings on the crank and the wrist pin ($100.00 value)---NO ALUMINUM RODS!
TOTAL of $268.00 in options included on this unit.
Unit features 2 stage, 3 cylinder compressor pump (MODEL EC-71-T)- CFM displacement 32 and a free air of 26 CFM @ 100 and 24 CFM @ 175 - 100% cast-iron construction compressor pump. This pump has a HIGH CFM at a LOW RPM. The way to tell this is to take the CFM Free Air (or SCFM) and divide the RPM of the pump into the CFM. This unit has a CFM per every revolution of 0.028. OUr competitions' unit run 1350 RPM on the pump speed and puts out 24 CFM @ 175 PSI. Their CFM per every revolution would be 0.017. This tells you that our pump is much larger and runs at a slower RPM of 840 versus 1350 RPM and we are putting out as much air at a much slower speed. Just remember, low RPM is better...your pump runs cooler and will last much longer. (Our competitions' units have throw-away one-piece connecting rods and reed valves. Our units are 100% rebuildable!!) Low RPM benefits are:
·smoother running
·longer pump life (5-year pump warranty)
·less heat
·much more dependability
Some of the competition's RPM are almost 1/2 or double the RPM of our pump because they are much smaller and have to run fast to produce the air. This pump has 1-piece connecting rod (all STEEL…not aluminum) with a rebuildable rod-to-crank bearing insert. 95% of the competition have no insert bearings-they are throw away. This pump has valves intake and exhaust that are concentric ring valves or disk valves. These valves can be taken out of the head without touching a head gasket. They are sealed by an O-ring. Very nice for easy and quick maintenance. It does not have reed valve system - disk valve is much better valve design. Disk valves have been in quality compressors for over 100 years. This pump has intercooler and aftercooler lines. The intercooler cools the air between stages and the aftercooler cools the air after it comes out of the 2nd stage. We mount this pump with a raised mounting platform under the compressor. This allows more airflow under the compressor crankcase and cools the crankcase oil. This pump has an oil site glass-this makes it easy to see your oil level for proper maintenance, automotive-type air filter (not special filter), 2-belt drive, not 1 belt drive, 2 groove cast-iron motor drive pulley. This pump is one of the biggest built. The motor is a 13 HP Honda--SUPER smooth running! Electric start, slant cylinder design for smoother motor operation, muffler has spark arrester and ensures super quiet operation, overhead valve design, hydraulic valve lifters, low oil shutdown, automatic engine decompression release for easy starting, fuel tank reservoir, key switch, and battery charger. This motor also has an electronic ignition-no points to fool with. This motor has very good cold weather starting ability. Motor carries a 3-year warranty from Honda and can be serviced at any of the Honda service centers in your area. This unit has a 30-gallon ASME-approved air receiver and a custom-built engine stand under the engine. This braces the platform of the tank and is easy for belt tightening. By using this platform under the engine, this unit is super smooth without hardly any vibration whatsoever. This unit runs as smooth as one of our electric driven units except for a little engine noise. This engine also has an engine idle-down when unit is in free-wheel mode. The air receiver has a drain 1/4" ball valve coming out of the front of the tank so you have easy access for draining. We use a quality tank gauge and all safety valves and pop-offs are ASME approved. Unit has a 3/4" ball valve as an air outlet. Our belt guard is custom built here at our factory. It is extra heavy duty-13 gauge expanded metal. This allows quiet operation and not a lot of vibration or noisy operation. This unit just needs a 12-volt battery and 2 battery cables, set it in your service truck, and it is ready to go. We pretest this unit at our factory. We run it for approximately 1 hour to make sure it is working properly before it leaves our factory. We can provide you with references if you wish to contact any of our customers. If you come to the factory to pick up your unit and you are not FULLY satisfied, you will not be obligated to take the unit with you. We are that confident that you will be 100% satisfied!! Email us with your City, State, and Zip of ship to destination to receive a freight quote. We give some of the most competitive shipping rates---but we do not "bump up" the unit cost and then claim "free shipping"!You can also pick the unit up here at our factory to save on freight. **PLEASE NOTE: When sending in payment for compressor, please include the following information with payment: Name, Business Name (if applicable), ship-to address, itemized list of what you have paid for (description of unit with amount, freight and additional services (if applicable). This helps our accounting department and ensures the correct unit is shipped since many are being shipped daily.** We accept money orders, cashier's checks, certified checks, business and personal checks, VISA, Mastercard, and Discover. However, if sending business or personal check, unit will ship 10 days after receipt of payment. We offer the best factory service & warranty in the industry and have all parts in stock if you would have a problem - ready for shipment. Thanks for taking the time to view our products.
PLEASE NOTE: SHIPPING IS NOT INCLUDED IN THE PRICES. WE DO NOT USE THE FREIGHT CALCULATOR ON OUR WEBSITE BECAUSE IT DOES NOT CALCULATE OUR DISCOUNT PLUS WE SHIP VIA UPS AND SEVERAL DIFFERENT FREIGHT COMPANIES TO GET YOU THE BEST DISCOUNT. THEREFORE, PLEASE CALL OR EMAIL FOR SHIPPING PRICES TO AVOID ANY CONFUSION. SHIPPING IS NOT FREE. THANK YOU!
