• 150HP 3 Phase Gear Driven Direct Drive Dual Volt Rotary Screw Combination Package

Rotary Screw Complete Package - 150 HP 3 Phase Fixed Speed Direct Drive

Includes: Cabinet, Refrigerated Air Dryer, and Receiving Tank

Find out more about our 150HP Direct Drive Three Phase Dual Volt Standard Fixed Speed Rotary Screw Air Compressor.  We offer Factory Direct prices with the best warranty in the industry...a FULL 10 years!

Call today 877-283-7614

User-Friendly Features Save Time And Money

Read More Complete Details

1. Larger Cabinet Size.
Compact cabinets can be a nightmare to service, our larger cabinet will allow for easier maintenance.  

2. Direct Gear Drive. 
Trouble-Free:  Lessens the load on pump and motor drive bearings with no belt maintenance making it worry free.  

3. Removable Doors 
With doors that can be easily removed, making servicing your compressor is quick and easy.  

4. Built-In Cabinet Rubber Isolator Pads
No need to buy extra rubber pads, this is a quick install.  

5. Spin-On/Spin-Off filters Mann brand; Oil Filter/Air Oil Separator Filters
These Mann Brand filters save 100% service time over in tank separator filter designs.

6. Name Brand MANN Filters 
Easily found off the shelf, non-proprietary.  

7. US Electric Motor Corp TEFC
Totally Enclosed Fan Cooled is not only dust and waterproof, but also saves time in cleaning; simply blow it off with an air hose.   

8. Clean Inner Cabinet Design
Fewer wires and less plumbing in a simple design makes service easily accessible.   

9. Top Mount Exhaust Cooling Fan 
Enables quick and easy service, and installation of exhaust ducting.   

10.  Programmable Logistic Controller. PLC

A. Maintenance Alarms - Extends life of compressor by reminding you when and what needs to be serviced in the unit.
B. Fault History Alarm. - Allows quick troubleshooting with notification (date/time) of unit shutdown fault that may occur.   
C. Daily Automatic Start/Stop Feature - No more needless running of the compressor with our Monday through Sunday, daily/weekly starting and stopping capabilities.    

11.  Mounted Electrical Cabinet.

A. The electrical cabinet is mounted in the front making the electrical components easily reached for installation and service. 
B. Control circuit protection breakers make it effortless to find, quick to test, and no expensive fuses.   
C. Multi-tap control transformer enables even control of voltage to all electrical components.  

12. Built-in Y-Delta Magnetic Contactors and Internal Check Valve - For Quick and Easy Installation

13.   VFD Ready - Includes Aegis Grounding Ring & SKF Insulated Front & Rear Motor Bearings
Saves Wear and Tear on VFD Applications

14. Built-In Cabinet Door Site Glass Window

The sight glass window allows the user to quickly and easily check the screw compressor oil level.  No need to remove cabinet doors.

15. Specially Designed Smaller Oil Sump - Reduces Amount of Oil Needed for Service

Many brands of rotary type compressors are specially designed to need a lot of oil for servicing.  Larger oil using systems cost more to service.  Polar Air by Eaton Compressor's Rotary Screw Compressors use up to 50% less oil, providing huge savings.

Plug and play quick install run an airline to your tank and connect to power.

We have hands down the best warranty in the Industry!


Featured Options:

    • No China Parts or Labor.

      Polar Air by Eaton Compressor uses NO China parts: Read More

    • Gardner Denver, US Electric Motor, Schneider, Mann and VMC.

      Our Major brand parts suppliers that we use : Read More

    • Finish Built and Tested in the USA.

      Our USA factory assembly line custom builds each compressor to the customer’s order and specifications. : Read More

    • 100% Duty Cycle Ultra Quiet Design.

      We guarantee 100% duty cycle up to 24/7 operation of the compressor.: Read More

    • Certification, UL/CSA listed and ASME/CRN Tank Certified.

      Our compressors are UL and CSA listed.: Read More

    • Legendary Precision GD Twin Rotary Screw Oil Flooded Pump. Energy Saver.

      Legendary Tamrotor by Gardner Denver pumps provide 24/7 operation: Read More

    • Legendary US Motor Corp:  Nema Standard, TEFC, 12 lead Premium Efficiency Electric and Aegis grounding ring with insulated front and rear bearings. Energy Saver.

      Low RPM of 1750 rpm provides high cold weather starting torque (not 3450 rpm) design. : Read More

    • Legendary Schneider Y/Delta Soft-Starting Magnetic Starter Switches. 12 Lead Energy Saver.

      Saves up to 1/3rd in peak starting demand. : Read More

    • Direct Gear Drive - no belts.

      Saves 1 to 2% in energy and provides maximum power transfer: Read More

      Smart Technology Programmable Controller Saves Energy.

      Simplifies Compressor Functions: Read More In Depth Explanation

Save that energy!

The Heart of your Rotary Screw:  Energy Facts - Rotary Screw Pumps

Tolerances and Rotor Profile Designs.  Components used to produce a rotary screw compressor pump are very important in regards to true energy savings.  Tamrotor E25G by Gardner Denver Male/Female Rotors and Cylinder Cases are machined to highest precision tolerances.  These high tolerance standards reduce internal pump leak paths and yield high scfm performance.  A lot of foreign rotary screw compressors talk a big game but cannot meet the precision tolerance standards in their rotary compressor performance.  This is because of outdated antiquated machinery and outdated compressor designs.  GD patented rotor designs yield the highest performance in KW to CFM output performance.  Making pumps with high-efficiency standard’s costs a lot more to produce in time and labor costs.  GD Finland is a top 5 world compressor component manufacturer with over 150 years of know-how experience in the compressor industry.  They are continuously increasing performance, staying ahead of the competition and saving energy.

 100,000 hr Bearing Performance. Most rotary screw compressors on the market are only good for 20,000 to 40,000-hour pump bearing life spans.  GD pumps are good up to 100,000 hours on the pump bearing life. Lower bearing quality and bearing designs, in turn, yield lower rotary screw pump life and low compressor performance over time.

Gear Driven Direct Drive Pumps.  Because of the true 100% alignment and load reduction of the pump and motor bearings, GD gear driven pumps save from 1-2% on energy over a belt driven pump.  Units without gearboxes have no flexibility in changing higher pressure ranges.  For every 10 PSI increase, it puts a 5% greater load on the electric drive motor.  Our units are gear set for 145 PSI ranges.  If a customer wants a higher PSI of 175, it requires a reduction in pump speed to reduce the load on the drive motor.  Our pumps can be changed to different gear ratios for a customer wanting a pressure increase, while units without a gearbox in place cannot change to a higher psi without changing the whole pump.  This can be a huge cost change.

Option Available - Rotary Screw VSD/VFD Advantage Option over a Rotary Vane Compressor   A rotary screw compressor is the most efficient in variable speed applications.  Our units can vary in the motor rpm as much as an 80% reduction.  Rotary screw units do not depend on centrifugal force to operate the compressor air like a vane type compressor.   A vane type compressor depends on the high rpm to slide the cylinder vanes to make compression.   When pump speeds are reduced a sliding vane pump loses rpm and its centrifugal force to operate yielding more leak paths and lower performance at lower pump speeds. Vane-style compressors also lose efficiency in higher PSI ranges.  A rotary screw pump has a fixed rotor and yields more cfm efficiency at higher pressure ranges up to 218 PSI if needed.

    Premium Industrial Motors

    We use only premium industrial name brand motors to run our compressors. Polar air uses only low 1750 RPM motors. We have chosen motors that come with the best certificates and quality assurances so we know that you are getting the best as well! We use High-Efficiency inverter variable speed duty motors constructed with superior materials, higher service factors, longer bearing lives, lower waste- heat output and less vibration. We also pass the motor warranty on to you for a full 5 year on single phase and a full 10 year on 3 phase!!

    The US Motor Corp Motors are made of heavy duty cast iron construction. We use TEFC (Total enclosed fan cooled ), meaning the motor is dust tight and doesn't allow outside air in, it instead uses the fan to blow air over the frame of the motor to cool it. These motors all have copper bar rotors, this technology dates back to the 1920's. Copper helps improve the electrical energy efficiency of the motor because of its density and ability to transfer energy. Many motors are made of aluminum rotors, these inefficient electric motors waste electrical energy and therefore cost more to operate. Copper reduces the energy loss by 15-20% compared to aluminum. Inefficient motors cause many issues, they waste more energy, in turn increasing electrical demand, thus increasing your electrical cost. Copper generates less heat and thermal stress, therefore, enabling longer life to the motor then aluminum.

    Premium Industrial Air Dryers

    This package includes our Industrial 850 CFM energy efficient air dryer. Our Polar Air dryer is the only energy efficient dryer system with an aluminum refrigerated air inner cooler. The air is filtered of all solid particles 0.01 micron and larger. Clean, dry compressed air leaving the dryer minimizes maintenance and repair and also reduces internal dryer contamination. We designed them with non-corrosive inner and after cooler. Our dryers feature stainless steel heat exchanger, Auto drain, a gauge to monitor refrigerant pressure, Outlet baffle heater to prevent condensation on the outlet, environmentally friendly 134A refrigerant, and a built in coalescing filter. These dryers carry a 10 Year warranty on the heat Exchanger and 2 year on the components. 

    Receiving Tank

    These units come with 660 gallon vertical painted receiving equipped with Hydraulic hoses and fittings. The dryer mounts right on top of the tank for setting on top of angled iron designed to take up less space.  These tanks are made in the USA  and have ring-based design to prevent cracking, Standard NPT ports, ASME, NBBI, & CRN approvals, they are rated up to 450 degrees F, and they are coated with anti-corrosive/ rust prevention blended steel to increase the tanks life.  

    VMC Inlet Valve

      As mention earlier the airend is the heart of the compressor but is does not work alone. The outside air is brought in and filtered before it hits the inlet valve to ensure it is receiving clean air.  The inlet valve regulates the amount of air that is sucked in by the rotary screw. When the valve is in a loaded state it is compressing air and pumping it into the airend, when it is in an unloaded state is shuts off the air supply, so the motor and screw air turning but not taking in air. Therefore not pumping any air to the system. Our VMC inlet valves have a counter weight which ensures fast, tight close when the air flow is reversed. This load and unload system has greater energy savings as well. When running the compressor in the unloaded state it allows the compressor to store more air than is being used., a storage tank must be used in this case.  The larger the storage tank the longer the no load cycle time, the greater the savings. This unit will save you hundreds on your electric bill because under start up the modulator valve is completely closed. This closes the air off to the screw intake making low load under start up. After the unit gets started, it has a 12-secound time delay. this allows the unit to get running fro 12 seconds before it starts pumping air. This makes no load starting and will save your magnetic starter contractor and motor because of low amp draw.  VMC was established in the 1970's      

    Programmable Logistic Controller    

    7.5hp air compressor by Eaton Compressor is controlled by a user-friendly Logika PLC (Programmable Logistic Controller). This controller makes this unit bullet proof. These controllers have may many features that are extremely user-friendly and easy to use. Here are some of its key features.

      variable speed ready to Control the speed of the motor

      Adjust Pressure - to what pressure range you need. This can be set by the customer, this unit has a shutdown in case the unit goes over pressure. the unit has a maximum pressure setting - the computer will sense that it is going over pressure and will shut down.

      Low Oil Shutdown - if the controller senses that the unit is going into high temperature it will shut it down. It will also shut down if the compressor runs low on oil.

      Reverse Fault - the controller will control when the unit is wired up if it is running backwards, it will sense a reverse rotation fault and shut the unit down

      High Voltage Fault - if the voltage is 15% over the power supply voltage rated on the Polar compressor data plate, the unit will shut down. Also if the voltage is 15% under it will shut is down as well.

      Over AMP Shut down - if the motor is pulling to many amps it will shut down. You can check the amp draw of the electric motor as it is running and also on the exhaust fan motor

      Clock and Date - Built in Clock and Date to help keep track of preventative maintenance services.

      Light - Has a built in light for dark locations.

      Parameters- has a maintenance parameter system to create and maintain the parameter and control information.

      Hour meter - Built in hour meter to keep track of the running hour on the machine.

      Fault History -The PLC stores history if the unit shuts down, information on why it shut down is stored

      Maintenance Service - Keeps track of when to change the air filter, oil filter and the coalescing filter along with the unit needs greased. When they need changed the PLC will sound an alarm.After changing you simply reset that filter back to zero and start the maintenance tracker again.

      Air Differential Control- with differential control you have a wide range of pressure settings. You can take the kick-in pressure all the way down to 100 PSI and all the way up to 145 PSI. You can adjust this range anywhere in between. You can also set the high end down to a lower pressure where ever the customer unit pressure is desired. The Polar Compressor is factory set at 120 kick in and 145 kick out. The lower the pressure the higher CFM and the more hours you will get on your screw compressor, so keep the pressure as low as possible.

      Built in Timer -will sense when the unit is not being used for a period of 20 minutes under no load, this will shut down the machine automatically so it will restart as air pressure goes down to the kick- in set point.

      On- line demand - this setting is made for high volume and will bypass the automatic kick-off mode. It allows the unit to keep running on continuous run mode for high air demand.

      Warranty - These PLC's carry a 5 year warranty

      Daily / weekly Schedule - This unit can be programmed to start in the morning, can shuts its self at lunch if needed and can turn itself in the even as well, or when ever needed.

      Self Start - if the power is lost this unit will automatically restart itself, this eliminates a maintenance crew to have to restart after the shut down.

      Master Slave - this controller can switch from one unit to the other and maintain the same use of hours, it can adjust the pressure to be the lead or the lag unit.


       Premium Mann Filters

      Filters help protect the compressor from wear and damage. It is the most inexpensive way to prevent possible costly repairs. It is vital that these filters are replaced and inspected on a routine basis, the timing is important as is reduces the chances of component and airend contamination. It can decrease the energy efficiency of your machine as well if not done.  Because we know the importance we use only genuine Mann Filters. These Filters are not exclusive to us therefore after your warranty is up you will still be able to find these parts. Mann Filters are made with exceptional quality and provide optimum protection against harmful elements. Our rotarys also havead Pre-Filtration on the outside of the cabinets. Although this is an upgraded feature it is one that is well worth the cost to protect the life of your compressor. Even in environments that are not that dirty the build up over time can be damaging to the system and seriously impact the performance. ask about adding a Pre-filter kit to your system to save even more money!                     


      When it comes to the smaller parts of our units we don't spare on quality either.  For Our electrical components are French made Telemecanique, they are also UL/CSA compliant. We use High-quality brass valves.  The Rotary screw cabinet is made with heavy metal construction with easy latch doors that contain sound proof material for ultra quiet operation. We do not use china parts on any of our rotary screws! We know that our units will prove themselves worthy of being the best air compressors on the market! Once you purchase one of our compressor from any of our series you are part of the Polar Compressor Family! If you have any questions or air ready for a quote please contact someone from our sales team and they will be happy to help! 

      The BEST Warranty Around!

      Polar Air by Eaton Compressor backs all their compressors with the best warranty in the industry, and we are not kidding we did the homework! WE have provided you with the warranty comparison as well. Polar Air By Eaton Compressor gives their Rotary screws a full 10-year warranty! The warranty is NOT pro-rated. Make sure to research and ask questions when warranty comparing. Be sure when you buy that you are buying a FULL warranty. Just remember, a Pro-rated warranty means that the older the compressor gets the more risk you are in, the potential percentage is higher that you may pay out of your pocket. With our warranty we don't ask you to buy a service plan or extended warranty, we just ask that you purchase and use our oil and filters. This ensures the correct oil with the specs needed to run our pumps is used. Our trained service and support team is ready if you ever need them and we carry a full line of new replacement parts. 


    Product Source
    Product Source America, Germany, Finland, Italy - No China
    Compressor Information
    CFM 706 @ 100 PSI MAX Adjustable 145 PSI
    Compressor Style Rotary Screw Air Compressor - Complete Package Cabinet, Dryer, & Tank
    Oil Type 8000-hour Synthetic Oil - Factory Filled / Mann Oil Filter - User-Friendly Spin-on / Mann Air/Oil Separator - User-friendly Spin-on / Mann Air Filter
    Drive Type Gear Driven Direct Drive - No Belt
    Air End Model Tamrotor/Gardner Denver
    Outlet Connection NPT 3"
    Dimension: Length x Depth x Height (in inches) Rotary - 63" x 104" x 75"
    Product Weight (Lbs) Rotary - 3496
    Motor Information
    Motor Type US Motor Corp - C-Flange - Cast-Iron Deep Finned - Premium Efficiency - NEMA Standard - 12 Lead Y-Delta/VFD Compatible - TEFC - No China
    Horse Power 150
    Phase 3
    Motor Speed (rpm) 1750 High Starting Torque
    Voltage Available in Voltages - 208/230/380/460/575
    Tank Information
    Tank Size 660 Gallon
    Tank Orientation Vertical
    Tank DIMS 128' X 49' X53'
    Tank Weight 1550
    Air Dryer Information
    Dryer CFM 850
    Dryer DIMS 27" x 31" x 55"
    Dryer Weight 790
    Dryer Orientation Stand Alone
    Dryer Drain Built in automatic
    Dryer filtration Built in Coalescing Filter
    Dew Point (degrees F) 37-50
    Pipe Size: Inlet & Outlet (inches) 3"
    Max Ambient Temperature (degrees F) 120
    Refrigerant Type 134A
    Max Rated Inlet Temperature (degrees F) 150
    Additional Information
    Certification Meets UL/CSA - ASME/CRN
    Noise DB (A) 83

    There are no reviews for this product.

    Write a review

    Note: HTML is not translated!
        Bad           Good

    150HP 3 Phase Gear Driven Direct Drive Dual Volt Rotary Screw Combination Package

    • Product Code: PRS150PKG3
    • Availability: Pre-Order
    • Retail Price: $68,865.00
    • Factory Direct Price: $57,099.00
    • Special Promotion Price: $48,750.00
    • Price Does Not Include Shipping & Handling

    • "For 575 or 380 volt call for quote"

    Available Options

    Related Products

    40HP 3 Phase Gear Driven Direct Drive Dual Volt Rotary Screw Combination Package

    40HP 3 Phase Gear Driven Direct Drive Dual Volt Rotary Screw Combination Package

    Rotary Screw Complete Package - 40 HP 3 Phase Fixed Speed Direct DriveIncludes: Cabinet, Refrigerate..

    Retail Price: $22,599.00
    Factory Direct Price: $18,075.00
    Special Promotion Price: $14,750.00

    Price Does Not Include Shipping & Handling

    "For 575 or 380 volt call for quote"

    Pre Order
    75HP 3 Phase Gear Driven Direct Drive Dual Volt Rotary Screw Combination Package

    75HP 3 Phase Gear Driven Direct Drive Dual Volt Rotary Screw Combination Package

    Rotary Screw Complete Package - 75 HP 3 Phase Fixed Speed Direct DriveIncludes: Cabinet, Refrigerate..

    Retail Price: $37,928.00
    Factory Direct Price: $30,543.00
    Special Promotion Price: $29,875.00

    Price Does Not Include Shipping & Handling

    Pre Order
    100HP 3 Phase Dual Volt Rotary Screw Air Combination Package

    100HP 3 Phase Dual Volt Rotary Screw Air Combination Package

    Rotary Screw Complete Package - 100 HP 3 Phase Fixed Speed Direct DriveIncludes: Cabinet, Refrigerat..

    Retail Price: $45,500.00
    Factory Direct Price: $36,999.00
    Special Promotion Price: $32,950.00

    Price Does Not Include Shipping & Handling

    "For 575 or 380 volt call for quote"