Check out our video on why our new Silent air system is a great option to add to your piston!
This unit can be used for heavy industrial applications such as body shops, machine shops, poly foam insulation rigs, sandblasting shops, car washes, wood working shops, dry cleaners & many other uses.
We guarantee our unit to be the best quality on the market. That is
why we offer a 5-Year Parts Warranty. Our product is the best or we
could not offer this warranty. We have been manufacturing units since
1977 and have approximately 90,000 units on the market and offer complete parts, sales, and service.
This unit has over $1441 in additional features at no additional charge!
Eaton Pumps are built to last and are SUPER quiet in
operation. This is because of our low pump speeds and compressor design.
The Pump has all steel connecting rods with replaceable rod bearing
inserts. This means our rods can be rebuilt and are not a throw-away.
99% of our competitions (name brand) are using aluminum throw-away
connecting rods with no rebuild able capability. The all cast iron
crankshaft with ball bearings on the front and rear of the crankshaft
create a smoother operating compressor and less drag and less electric
being used. Removable 100% cast iron cylinders. This is more stable
under heavy workloads and does not warp from heat like aluminum
cylinders with a pressed-in sleeve. Most of our competition are using
aluminum cylinders with a pressed-in sleeve. They are only good for
40-50% duty cycle and claim 100% duty cycle. In a year or so, most are
replaced because they would not hold up under heavy use. All cast iron
cylinder heads – NOT aluminum. Aluminum heads from heat will warp and
cause head gasket problems. Cast iron head is more dependable and will
last with trouble free operation. Intake and Exhaust valves are disk
valve design. Most of our competition are using reed valves which are
throw away and not rebuildable. Disk valves can be serviced in minutes
instead of hours like reed valves. Our disk valves come out of the top
of the head. Disk valves have been around for over 100 years. Our
compression and oil rings are high quality and provide low oil carry
over (1-5 pmm). Our pumps are precision ground pistons with tight
tolerances for low oil carry over. We also use quality non-absorbent
gaskets. This keeps oil seepage from coming off of the pump. This pump
has an all cast iron flywheel with built-in fan– NOT aluminum. Aluminum
does not give the proper throw when the pump is running. The extra
weight of cast iron when running gives the pump more throw on the
compression stroke and puts less load on the electric motor. Our
crankcase is also all cast iron – NOT aluminum. All cast iron will give
stable crankshaft alignment and will handle more work load under heavy
load conditions. This pump has built-in intake head unloaders. These
unloaders are built into the intake valve assembly on the compressor
head. These unload or open the intake valves under constant run
applications such as gas drive and electric units for constant run
applications. This feature reduces internal pump heat from compression
because the intake valve is held open under unloading cycle. It allows
fresh air to come into the cylinder chamber but under compression
stroke, the unloader holds the intake valve open allowing the air to
blow back out the intake filter. This fresh air absorbs the heat out of
the pump under heavy workloads. This pump includes a pre-cooling line
that cools the air before it goes into the tank and also includes an all
copper main feed line from the pump into the tank. This is copper for
durability and not aluminum. We have one of the lowest RPM compressors
on the market. This is critical. Many companies are lowering the quality
of their product and running high RPM. High RPM causes high noise or db
levels, lots of water in your air because the air is
much hotter, lots of vibration and harmonic distortion, less belt wear,
and most of all – longer pump life. Don’t cheat yourself…go low RPM and a
BIG pump. Go Big or go home – you will be glad you did. Compare pump
speeds from different manufacturers and you will see we are the lowest
RPM. We can still give you high CFM with low RPM because our bore and
stroke are larger allowing us to run the pump slower causing less
friction and heat buildup. Just remember…speed kills. Our competition is
using small pumps that are noisy and high RPM. This is a recipe for
Let’s break it down:
RAISED MOUNTING PLATFORM
This platform is a nice feature for keeping your oil cool within the pump. This platform raises the pump approximately 2” off the mounting base plate. This allows 100% of the fan from the flywheel to circulate cool air not only on the sides and front of the crankcase, but also under the crankcase as a constant flow of air. This feature gives your pump cool oil - - cooler oil not only helps to lubricate the pump but pulls the heat off the pistons and connecting rods. This will add many years of life to the compressor pump.
This unit includes an auto belt tentioner. If you have ever tightened belts on your compressor, you will know without a belt tentioner that it is almost impossible to get the correct belt tension and keep your belts in alignment. With our unit, this is not a problem anymore. Just loosen the 4 bolts under the motor about 2 threads and take a ¾” wrench and turn the bolt on the end of the tentioner and your belts are tightened and perfectly aligned. This makes maintenance happen in a few minutes and it is done correctly.
We manufacture our belt guards tougher than any you will find today. Many are using plastic or a bird-cage style belt guard. This is a cheap way of building a belt shield and is not durable. Our belt guard is made out of 13-gauge material and is all OSHA approved.
Our tanks are ASME code American Made air receivers. This tank meets codes in all 50 states including California.
CONTROLS & COMPONENTS
Top quality pressure switch with adjustable screw to adjust your pressure higher or lower. Our check valves are all brass with a Teflon seat. This makes low tank noise when the compressor is running because Teflon is much quieter when opening and closing during the compression stage. All brass ASME code safety valve is used for your safety. Our valves are preset and sealed for correct settings. If your compressor would not turn off, our safety valves will open and keep from building too high pressure and potentially keeping the tank from rupturing. Top quality plumbing fittings are used to maintain proper sealing when connected to the tank. High quality all brass ball valve is used for turning air on and off from the air receiver. Tank water drain pipe plumbed out the front of the unit with a ¼” ball valve handle for easy tank draining without the hassle of draining the tank with a petcock under the tank. Load less starting is built onto this unit. This unloads the pump so the pump will not start under direct head pressure. Without this feature, this will cause motor damage under starting cycle.
CONTINUOUS RUN & AUTOMATIC START/STOP
Under heavy workloads such as sandblasting, your compressor can cycle on and off many times per hour. This cycling is causing the magnetic contacts more wear because they are arching as they start and stop. A single phase motor also is arching because it has start and run windings built inside. When the motor is starting, it is on the start windings. The capacitors shoot 580V of power to the motor windings to start. As the motor gets to full RPM, there is a centrifugal switch that switches it from start to run windings. Every time this is done, your contacts are arching from start to run procedure. That is why the continuous run is good because under workloads over 50% duty cycle, it eliminates this arching and wear and tear on your magnetic contactor. The other reason is because under applications such as poly foam insulation trucks, their generator cannot handle the starting and stopping loads, so the continuous run is a better way to go under this type of application. Then when you are back into normal workloads in your shop, you can turn off the continuous run and the unit will go to automatic start/stop feature. It will just start and stop like a normal compressor.
With heater overload
MOTOR PULLEY& BELTS
Our pulleys are 2-groove and not 1-groove. You will see many compressors only using 1 belt to drive the pump. This unit uses 2-groove, B-Style belts. This ensures long belt life and low vibration and makes a quieter unit because the belts do not have to be so tight to drive the pump. The tighter the belts, the more load on the compressor pump bearings and the motor bearings and decreases the life. Our pulleys are taper lock design. This is much better than a fixed bore with a set screw. A taper lock will lock the pulley in position to the motor shaft allowing it not to loosen or move on the shaft. Our belts are also top quality and will last many thousands of hours of running.
|CFM||17 SCFM @ 175 PSI @ 19 SCFM @ 100 PSI|
|Compressor Stages||single stage|
|Compressor Style||Piston Electric|
|Crated Dimensions L x W x H||46 x 48 x 88|
|Description||5HP Single Stage Air Compressor|
|Factory Settings||145 PSI Shut off Max Pressure - Turn on Pressure 100 PSI|
|Low Oil Shut-off:||No low oil shut off - has sight glass|
|Max Working PSI||145|
|Pump Material||Solid Cast Iron|
|Pump model number||APP2V0732S|
|Pump Style||Single Stage two cylinder|
|Product Weight (Lbs)||shipping weight 770|
|Running AMP||13 AMP @ 208/230 VOLT- 6 AMP @ 460 VOLT|
|Start Up AMP||26 AMP @ 208/230 – 12 @ 460 VOLT|
|Recommended Breaker||20 AMP @ 208/230- 15 AMP @ 460 VOLT|
|Size||80 Gallon Vertical|
|Outlet Size||NPT 3/4"|
|Certification||UL, CSA, ASME|
|Noise Rating||73 DBA|
|Warranty||5 year Bumper to Bumper- non Pro-rated|